【 Brief introduction of H20 timber beam products 】

1、H20 timber beam is an important part of the international general building formwork system. It adopts the high-quality spruce imported from Finland, which has the characteristics of light weight, high strength, good straightness, not easy to deform, water resistance and acid-base resistance on the surface. It can be used around the year with low cost amortization. It can be used in common with the professional formwork system products at home and abroad.

2、It can be widely used in horizontal formwork system (roof formwork, flexible formwork), vertical formwork system (core tube wall formwork, column formwork, hydraulic climbing formwork, cantilever formwork, shaft formwork, single sided formwork, etc.), variable arc formwork system and heterosexual formwork system.

3、The wall formwork of H20 timber beam is a loading and unloading formwork, which is easy to assemble. It can be assembled into various sizes of formwork in a certain range and extent, with flexible application. The rigidity of the formwork is large, and the extension and height are convenient. The formwork can be poured for more than 10 meters at a time. Because of the light weight of the formwork material, the whole formwork is much lighter than the steel formwork in assembling. The structural section change can be easy to change the formwork directly on site, which is convenient and flexible.

4、The system products have high degree of standardization, good reusability and meet the requirements of environmental protection.

                                                            【 Technical parameters of H20 timber beam】

¤ Beam Height:200mm                                     ¤ Thickness: 40mm

¤ weight: 4.6kg/m                                             ¤ Width: 80mm

¤ glue: White latex                                            ¤ Web Thickness:7mm

¤ Length:3.0M                                                   ¤ colour：Yellow

¤ Perm Deflection:1/500                ¤ Modulus of elasticity: 10,200N/mm2

¤ Perm Shear Force:11.2KN                              ¤ Perm Shear Force:11.2KN

¤ Application scope of H20 timber beam: it can be used in Civil Engineering: bridge, dam, tunnel, subway, nuclear power station, construction and other projects.

¤ Standard length of  H20 timber  beam: 2.40, 2.60, 2.90, 3.30, 3.60, 3.90, 4.50, 4.90 and 5.90 meters.

¤H20 timber beam can also produce  timber beam with web of different length or thickness according to different needs.